Fiber Lasers and Amplifiers (1 μm & 1.5 μm)

The Isruz is a compact CW Fiber Laser delivering up to 20W of output power, through a near diffraction limited beam (M²<1.1). The excellent beam quality and power stability make the Isruz a multi-purpose tool. The all-fiber design guarantees the robustness of the laser, without any optical parts to align or to stabilize. The simple integration of the Bench Top system requires no after-installation service. The ML-CW-R-TKS-1550 is the ideal solution for a broad range of industrial and scientific applications. The Isruz laser is also available in a compact OEM format under part number ML-CW-R-OEM-1550.

The Tarv is a CW Yb laser available in Benchtop or OEM compact formats delivering up to 100W of output power, through a near diffraction limited beam (M²<1.1). The excellent beam quality and power stability make the Tarv a multi-purpose tool. The all-fiber design guarantees the robustness of the laser, without any optical parts to align or to stabilize. There is no need to send back the lasers to Manlight for maintenance as one can make the swap of the pump diode very easily directly on site. Maintenance and lifetime of the product is no more an issue. The simple integration of the system requires no after-installation service. The Tarv is the ideal solution for a broad range of industrial applications including laser marking, laser cutting, laser welding, laser printing, laser sintering, laser engraving, laser  research,  laser measurement, laser micromachining, and graphic imaging.

The ML-YFA-CW-R-TKS, "Turn Key System" is a compact 1.0μm CW Fiber Amplifier delivering up to 40W of output power through a diffraction limited linearly polarized beam (M²<1.1). The polarization maintaining version, the ML-YFA-CW-P-TKS, can reach output power of 20W. The ML-YFA-CW-R-TKS and ML-YFA-CW-P-TKS are optimized for the amplification of laser sources of more than 100MHz Full Width at Half Maximum (FWHM).

The ML-YFA/EYFA-CW-SLM-P-TKS, “Turn Key System“ is a compact CW Fiber Amplifier delivering up to 15W of output power at 1.0µm and 10W at 1.5µm, through a near diffraction limited linearly polarized beam (M²<1.3). The ML-YFA/EYFA-CW-SLM-P-TKS is optimized for the amplification of Single Longitudinal Mode (SLM) laser sources of down to 10kHz instantaneous Full Width at Half Maximum (FWHM).

The design and configuration of these amplifiers render them unique and reliable. For more information please email manlight@rpmclasers.com or call 636-272-7227.

These high power bench top amplifiers are optimized to offer high performance and low noise with proven reliability and quality. These amplifiers are intended to be used in various domains like high speed optical transmissions, booster amplifier for transmitters, sensors as well as test and measurement setups.
Featuring on board control electronics capabilities, these EDFAs can be operated in variety of control modes including Automatic Current Control (ACC), Automatic Power Control (APC) or Automatic Gain Control (AGC). Delivered with standard GPIB and RS-232 interfaces, these units offer a user-friendly interface ideal for PC-remote-controlled system experiments.
Available in a 155.5 x 257 x 376 mm package

PM Versions also available.

The JenLas® fiber CW 50-400 W are CW fiber lasers with modulation rates of up to 100kHz.
These lasers emit with a center wavelength of 1070nm with power levels as high as 400W with excellent beam quality of M2<1.1!  These lasers are ideal for cutting and welding applications where outstanding edge quality is desired.

The JenLas® fiber CW 1550 provides 10W of average power at 1550nm.  This laser is ideal for biomedical, aesthetic, optical tweezing, platics welding, and micromachining applications.